PPE 158031500 STAGE 3 TIE ROD ASSEMBLIES

Fitment: 2001-2010 GM 2500HD/3500HD

SKU: PPE158031500
$251.99
$251.99
Please hurry! Only 0 left in stock
Subtotal: $251.99
10 customers are viewing this product
PPE 158031500 STAGE 3 TIE ROD ASSEMBLIES

PPE 158031500 STAGE 3 TIE ROD ASSEMBLIES

$251.99

PPE 158031500 STAGE 3 TIE ROD ASSEMBLIES

$251.99
The PPE 158031500 Stage 3 Tie Rod Assemblies feature a larger, robust design to maximize the reliability of the steering system in your 2001-2010 GM 2500HD/3500HD. Factory tie rod assemblies bend and break. They are simply too small and weak to get the job done, especially in high-stress situations. While they are generally strong enough for stock performance, street driven pick-ups, with the added stress that come from larger tires, racing, and off-road use, wont hold up for long.

The fix for these weak tie rod assemblies comes in three stages. All three are bolt-on parts and require no extra modifications to factory components. A two or four wheel alignment is recommended post install. The best they have; these tie rods are overkill for most, for sure, but when it comes to steering components, failure is not something that can be stood for. Featuring 1.5 inch wide forged tie rod, massive 2-1/3 inch ball joints and a much larger and stronger inner ball joint these tie rod assemblies are the best of the best.

FEATURES:
  • 3/4" Toe Adjusting Shaft
  • Lock Nut For Spindle Connection
  • Grease Fitting For Easy Maintenance
  • Heavy-Duty Forged Steel Construction
  • Limited Lifetime Warranty

WHEN COMPARED TO FACTORY COMPONENTS:
  • 53% Larger Tie Rod Body 
  • 28% Larger Inner Ball Joint 
  • 35% Larger Outer Ball Joint 
  • 30% Larger Toe Adjusting Shaft 

Note: 
When using on trucks with aftermarket lift kits, the end user must trim one-half-inch off the outer portion of both tie rod ends.
PPE Stage3 Tie Rods are engineered to fit GM stock steering components. Some aftermarket steering manufacturers have changed the placement of the tie rod mounting perch on the front spindle, which then requires a shorter tie rod. The Stage3 Tie Rod outers are fully-threaded internally and may be trimmed to accommodate the relocated aftermarket perch location. An experienced installer should measure to determine the appropriate trim length.

Product Returns

Product Return Policy

  • Returns must be packaged securely in an outer carton
  • Do not write on the product packaging itself. Write only on the outer shipping carton.
  • Packages received without a Return Authorization Number written clearly on the outer carton will be refused.
  • Returnable items must be received by SUP within 30 days of the product being received by you the customer. (determined by tracking number)
  • Returned product must be in new, re-saleable condition, with all original boxes, packaging, parts, cables, manuals, etc.
  • Upon receipt, all returns will be inspected, and, at our discretion, credit may be refused or a restocking fee of 5%-10% may be assessed.
  • Original shipping cost and shipping protection charges are non-refundable.
  • Customer is responsible for shipping costs incurred to return products.
  • Products can only be returned for a refund, store credit, or an exchange for the same item. Product cannot be exchanged for a different part number.

Some Circumstances in which credit will not be issued but not limited to:

  • Product has been installed and/or used
  • Product has been damaged from an attempt to be installed and/or used
  • Product is shipped back without original box, manual and/or parts
  • Seal on electrical parts is broken
  • Product serial number does not match that of which was original shipped to buyer
  • Product is deemed not resell able by SUP due to customers own actions in dealing with the product

Core Returns

Core Return Instructions: STOP! Please read to avoid costly delays!

  • Step 1:  Verify the core will be received back within 30 days. (See Deadline)
  • Step 2: Fill out the Return Form.
  • Step 3: Wait for return instructions. SUP will email a return number (RMA) and a return shipping address. Many cores will be sent directly back to the manufacturer, so please read the instructions.
  • Step 4: Package the core. Good packaging prevents costly damage and/or the core being refused by the shipping carrier. It may be possible to reuse the box your original product came in. If not, use a box strong enough to support the product. Seal the product in a plastic bag to prevent leaks. Cushion the product with packing material and securely seal the package with tape.
  • Step 5: Attach the shipping label you have purchased (see return shipping policy) and write the return number (RMA) large and clear on the outside of the box.
  • Step 6: Ship the core.

Core Return Policy *** Important Please Read ***

Deadline: Core returns will only be accepted within 30 days of receiving the original product. After 30 days core credit refunds will be at the discretion of SUP.

Refund Policy: Returns made between 0-30 days are eligible for credit back to the original payment method used for the purchase. Credit may be full, partial, or denied based on the acceptance policy below. Please allow up to 4 weeks after the core is received for inspection and refund if accepted.

Return Shipping Policy: Core return shipping is the responsibility of the customer. SUP recommends using a carrier that provides package tracking and insurance. You will not be reimbursed for shipping costs incurred in shipping the core. SUP is not responsible for cores received damaged, freight penalties, and/or lost shipments.

Acceptance Policy:

 

  • No leaking fluids, all fluids must be drained, and the core must be sealed in a plastic bag. 
  • The core returned must be a like-for-like make, model, type, and part number.
  • Cores will not be accepted from a salvage or junkyard.
  • Cores must not be disassembled or have missing and/or damaged major components. 
  • Cores must be in rebuildable condition.

Core refund acceptance is at the discretion of SUP and the manufacturer/remanufacture or the original product. Failure to follow the above policy may result in partial credit and/or no credit being issued. If you would like a core returned that has been denied acceptance, you may request that within 30 days and pay for return shipping. Cores that have not been accepted and are unclaimed by the customer after 30 day will be destroyed and disposed of.

Updated 08/22/2024

Related Products

Recently Viewed Products