Mishimoto Baffled Oil Catch Can Kit - 16-19 Nissan Titan XD Cummins

Fitment: 2016-2019 Nissan Titan XD 5.0 Cummins

SKU: MIMMMBCC-XD-16CBE2
$304.95
$304.95
Please hurry! Only 0 left in stock
Subtotal: $304.95
10 customers are viewing this product
Mishimoto Baffled Oil Catch Can Kit - 16-19 Nissan Titan XD Cummins

Mishimoto Baffled Oil Catch Can Kit - 16-19 Nissan Titan XD Cummins

$304.95

Mishimoto Baffled Oil Catch Can Kit - 16-19 Nissan Titan XD Cummins

$304.95
As powerful as the all-new Cummins V8 engine is, it still needs some protection, and the Mishimoto engineers created a baffled catch can kit to do just that.

Mishimoto’s 2016-2019 Titan XD Catch Can Kit features Mishimoto’s oversized Baffled Oil Catch Can with several internal baffles to better separate oil from the crankcase vapors. Strategic positioning in the engine bay prevents condensation buildup in the catch can from freezing in cold climates. Two direct-fit hoses and an application-specific bracket make for a quick and simple installation.

To back up Mishimoto’s superior craftsmanship, each 2016-2019 Titan Catch Can Kit comes with the renowned Mishimoto Lifetime Warranty!

Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.

Note: Vehicles affected by Nissan service campaign #PC511 may require an ECU tune to use this catch can kit without a check engine light. The ECU re-flash performed under this campaign increases the sensitivity of the CCV pressure sensor and may lead the ECU to believe that a CCV hose is unplugged when using this kit. Please contact your dealer to verify if your vehicle has been re-flashed under this campaign.After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle

Mishimoto Baffled Oil Catch Can Kit Features:

  • Direct fit mounting bracket and hoses for the 2016-2019 Nissan Titan XD Cummins
  • Internal air diverter increases air turbulence to capture and prevent oil and water blow-by from entering the intake
  • Strategic positioning in the engine bay prevents condensation from freezing in cold weather
  • Oversized catch can capacity developed specifically for truck applications
  • Fully serviceable catch can
  • Fully sealed, billet 6061 aluminium catch can
  • Mishimoto Lifetime Warranty

Product Returns

Product Return Policy

  • Returns must be packaged securely in an outer carton
  • Do not write on the product packaging itself. Write only on the outer shipping carton.
  • Packages received without a Return Authorization Number written clearly on the outer carton will be refused.
  • Returnable items must be received by SUP within 30 days of the product being received by you the customer. (determined by tracking number)
  • Returned product must be in new, re-saleable condition, with all original boxes, packaging, parts, cables, manuals, etc.
  • Upon receipt, all returns will be inspected, and, at our discretion, credit may be refused or a restocking fee of 5%-10% may be assessed.
  • Original shipping cost and shipping protection charges are non-refundable.
  • Customer is responsible for shipping costs incurred to return products.
  • Products can only be returned for a refund, store credit, or an exchange for the same item. Product cannot be exchanged for a different part number.

Some Circumstances in which credit will not be issued but not limited to:

  • Product has been installed and/or used
  • Product has been damaged from an attempt to be installed and/or used
  • Product is shipped back without original box, manual and/or parts
  • Seal on electrical parts is broken
  • Product serial number does not match that of which was original shipped to buyer
  • Product is deemed not resell able by SUP due to customers own actions in dealing with the product

Core Returns

Core Return Instructions: STOP! Please read to avoid costly delays!

  • Step 1:  Verify the core will be received back within 30 days. (See Deadline)
  • Step 2: Fill out the Return Form.
  • Step 3: Wait for return instructions. SUP will email a return number (RMA) and a return shipping address. Many cores will be sent directly back to the manufacturer, so please read the instructions.
  • Step 4: Package the core. Good packaging prevents costly damage and/or the core being refused by the shipping carrier. It may be possible to reuse the box your original product came in. If not, use a box strong enough to support the product. Seal the product in a plastic bag to prevent leaks. Cushion the product with packing material and securely seal the package with tape.
  • Step 5: Attach the shipping label you have purchased (see return shipping policy) and write the return number (RMA) large and clear on the outside of the box.
  • Step 6: Ship the core.

Core Return Policy *** Important Please Read ***

Deadline: Core returns will only be accepted within 30 days of receiving the original product. After 30 days core credit refunds will be at the discretion of SUP.

Refund Policy: Returns made between 0-30 days are eligible for credit back to the original payment method used for the purchase. Credit may be full, partial, or denied based on the acceptance policy below. Please allow up to 4 weeks after the core is received for inspection and refund if accepted.

Return Shipping Policy: Core return shipping is the responsibility of the customer. SUP recommends using a carrier that provides package tracking and insurance. You will not be reimbursed for shipping costs incurred in shipping the core. SUP is not responsible for cores received damaged, freight penalties, and/or lost shipments.

Acceptance Policy:

 

  • No leaking fluids, all fluids must be drained, and the core must be sealed in a plastic bag. 
  • The core returned must be a like-for-like make, model, type, and part number.
  • Cores will not be accepted from a salvage or junkyard.
  • Cores must not be disassembled or have missing and/or damaged major components. 
  • Cores must be in rebuildable condition.

Core refund acceptance is at the discretion of SUP and the manufacturer/remanufacture or the original product. Failure to follow the above policy may result in partial credit and/or no credit being issued. If you would like a core returned that has been denied acceptance, you may request that within 30 days and pay for return shipping. Cores that have not been accepted and are unclaimed by the customer after 30 day will be destroyed and disposed of.

Updated 08/22/2024

Related Products

Recently Viewed Products