BD-POWER 1032160 STEERING UPGRADE KIT

Fitment: 2001-2010 GM SILVERADO/SIERRA 2500HD | 2007-2010 GM SILVERADO/SIERRA 3500HD

SKU: BD1032160
$895.95
$895.95
Please hurry! Only 0 left in stock
Subtotal: $895.95
10 customers are viewing this product
BD-POWER 1032160 STEERING UPGRADE KIT

BD-POWER 1032160 STEERING UPGRADE KIT

$895.95

BD-POWER 1032160 STEERING UPGRADE KIT

$895.95
 BD-Power 1032160 Steering Upgrade Kit that will enhance the drivability of your 2001-2010 GM Silverado/Sierra 1500/2500HD/3500HD. A major weak point on GM HD series trucks is the steering linkage and tie rods with high torque engines, lift kits, and larger tires putting greater stresses on the steering system than what the factory intended. These failures can lead to loose steering, front wheels toe-in under load while in four-wheel drive, and broken tie rods. If you have performance upgrades in your truck, lifted it, or do heavy towing, you will want to upgrade your steering kit before doing catastrophic damage to the front end!

This BD-Power Steering Upgrade Kit includes a centerlink, (2) tie-rods, (2) sway bar end links, a 3-spline pitman arm, and an idler arm. The forged I-Beam Centerlink is 30% stronger than the factory unit, reducing flex in the steering system and creating a strong base for the tie rods to be bolted to. The tie rods are 1.5 times thicker than stock units for reduced flex and have larger inner ball joints for reduced wear. Testing has shown that BD tie rods can take over double the amount of force that stock rods can handle. The Ball joints in this kit come with sintered bearings and allow for better load holding and increased service life. Longer, high-strength sway bar end links that have a through-bolt design are included to accommodate larger tie rods and leveling kits. Polyurethane bushings have factory-style shaping for great articulation and durability. All Ball joints, the pitman, and the idler arm are greaseable.

The BD-Power Steering Upgrade Kit retains OEM geometry for accurate steering and will allow for any factory replacement parts to drop in without any geometry misalignment or modification required. Other aftermarket upgrade kit designs change the steering geometry which can sacrifice safety and drivability for straight-line strength while pulling or racing. This can also create a hazardous "bump steer" where the vehicle becomes uncontrollable on uneven highways or trails. By not altering the steering geometry, the BD upgrade kit saves you from these issues. The total package is an affordable upgrade for your worn-out steering and will increase the durability, longevity, and dependability of your truck while saving money by avoiding catastrophic repairs.

FEATURES:
  • Greaseable Pitman Arm & Idler Arm
  • Compatible With OEM Components
  • Tie Rods 1.5 Times Larger Than OEM
  • Larger Greaseable Ball Joints For Long Service Life
  • Forged Centerlink Retains Factory Geometry For Accurate Steering
  • 1" Longer Sway Bar End Links Prevent Damage To Tie Rod Seals & Boots
  • Forged I-Beam Centerlink Is 30% Stronger Than OEM For Less Deflection
  • Sway Bar End Links 1" Longer Than Factory To Accommodate Leveling Kits
  • Durable Polyurethane Sway Bar End Link Bushings Shaped For Articulation & Durability

Product Returns

Product Return Policy

  • Returns must be packaged securely in an outer carton
  • Do not write on the product packaging itself. Write only on the outer shipping carton.
  • Packages received without a Return Authorization Number written clearly on the outer carton will be refused.
  • Returnable items must be received by SUP within 30 days of the product being received by you the customer. (determined by tracking number)
  • Returned product must be in new, re-saleable condition, with all original boxes, packaging, parts, cables, manuals, etc.
  • Upon receipt, all returns will be inspected, and, at our discretion, credit may be refused or a restocking fee of 5%-10% may be assessed.
  • Original shipping cost and shipping protection charges are non-refundable.
  • Customer is responsible for shipping costs incurred to return products.
  • Products can only be returned for a refund, store credit, or an exchange for the same item. Product cannot be exchanged for a different part number.

Some Circumstances in which credit will not be issued but not limited to:

  • Product has been installed and/or used
  • Product has been damaged from an attempt to be installed and/or used
  • Product is shipped back without original box, manual and/or parts
  • Seal on electrical parts is broken
  • Product serial number does not match that of which was original shipped to buyer
  • Product is deemed not resell able by SUP due to customers own actions in dealing with the product

Core Returns

Core Return Instructions: STOP! Please read to avoid costly delays!

  • Step 1:  Verify the core will be received back within 30 days. (See Deadline)
  • Step 2: Fill out the Return Form.
  • Step 3: Wait for return instructions. SUP will email a return number (RMA) and a return shipping address. Many cores will be sent directly back to the manufacturer, so please read the instructions.
  • Step 4: Package the core. Good packaging prevents costly damage and/or the core being refused by the shipping carrier. It may be possible to reuse the box your original product came in. If not, use a box strong enough to support the product. Seal the product in a plastic bag to prevent leaks. Cushion the product with packing material and securely seal the package with tape.
  • Step 5: Attach the shipping label you have purchased (see return shipping policy) and write the return number (RMA) large and clear on the outside of the box.
  • Step 6: Ship the core.

Core Return Policy *** Important Please Read ***

Deadline: Core returns will only be accepted within 30 days of receiving the original product. After 30 days core credit refunds will be at the discretion of SUP.

Refund Policy: Returns made between 0-30 days are eligible for credit back to the original payment method used for the purchase. Credit may be full, partial, or denied based on the acceptance policy below. Please allow up to 4 weeks after the core is received for inspection and refund if accepted.

Return Shipping Policy: Core return shipping is the responsibility of the customer. SUP recommends using a carrier that provides package tracking and insurance. You will not be reimbursed for shipping costs incurred in shipping the core. SUP is not responsible for cores received damaged, freight penalties, and/or lost shipments.

Acceptance Policy:

 

  • No leaking fluids, all fluids must be drained, and the core must be sealed in a plastic bag. 
  • The core returned must be a like-for-like make, model, type, and part number.
  • Cores will not be accepted from a salvage or junkyard.
  • Cores must not be disassembled or have missing and/or damaged major components. 
  • Cores must be in rebuildable condition.

Core refund acceptance is at the discretion of SUP and the manufacturer/remanufacture or the original product. Failure to follow the above policy may result in partial credit and/or no credit being issued. If you would like a core returned that has been denied acceptance, you may request that within 30 days and pay for return shipping. Cores that have not been accepted and are unclaimed by the customer after 30 day will be destroyed and disposed of.

Updated 08/22/2024

Related Products

Recently Viewed Products