Banks Power Boost Tube System
Banks Power Boost Tube System
Banks Power Boost Tube System
Banks Power Boost Tube System

Banks Power Boost Tube System

Fitment: 2013-2018 RAM 6.7L CUMMINS

SKU: BP25995
$439.00
$439.00
Please hurry! Only 0 left in stock
Finish: Raw Finish
Subtotal: $439.00
10 customers are viewing this product
Banks Power Boost Tube System

Banks Power Boost Tube System

$439.00
Banks Power Boost Tube System
Banks Power Boost Tube System
Banks Power Boost Tube System
Banks Power Boost Tube System

Banks Power Boost Tube System

$439.00
Finish: Raw Finish
Description

Increase flow area up to 103% over the stock 2-3/4" boost tubes with Banks' huge 3-1/2" OEM left and right side boost tubes. Stock hot side tube is dented at the factory, bringing it's diameter down to a tiny 2-1/4". Banks boost tubes are 3-1/2" constant diameter mandrel bent with larger radius bends. More air allows for more fuel which means more horsepower.

50 State Compliant
CARB E.O. D-161-122

Fitment Note:

This kit is designed to work with stock elbow or new Banks Monster-Ram (3.5" or 4") and the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).

Specifications:

Banks hot and cold side tubes have up to 103% greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.

Looking for the ultimate flow increase? Banks Boost-Tubes are larger than the factory pipe and designed to work with not only the stock elbow but also the new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even faster.

Key Features:

  • 3-1/2" constant diameter mandrel bent with larger radius bends
  • Combine with Banks Monster Ram Gen 2 for maximum power
  • More air allows for more fuel which means more horsepower
  • Over 73% larger flow area vs stock (3.5in vs 2.75in)
    (103% larger if you count the OEM dent)
  • 4- and 5-ply heavy-duty silicone couplers
  • Spring-loaded constant tension clamps
  • Greater cooling capacity
  • Perfect fit and finish
  • Lower EGTs

    •  

    Return Policy

    Product Returns

    Product Return Policy

    • Returns must be packaged securely in an outer carton
    • Do not write on the product packaging itself. Write only on the outer shipping carton.
    • Packages received without a Return Authorization Number written clearly on the outer carton will be refused.
    • Returnable items must be received by SUP within 30 days of the product being received by you the customer. (determined by tracking number)
    • Returned product must be in new, re-saleable condition, with all original boxes, packaging, parts, cables, manuals, etc.
    • Upon receipt, all returns will be inspected, and, at our discretion, credit may be refused or a restocking fee of 5%-10% may be assessed.
    • Original shipping cost and shipping protection charges are non-refundable.
    • Customer is responsible for shipping costs incurred to return products.
    • Products can only be returned for a refund, store credit, or an exchange for the same item. Product cannot be exchanged for a different part number.

    Some Circumstances in which credit will not be issued but not limited to:

    • Product has been installed and/or used
    • Product has been damaged from an attempt to be installed and/or used
    • Product is shipped back without original box, manual and/or parts
    • Seal on electrical parts is broken
    • Product serial number does not match that of which was original shipped to buyer
    • Product is deemed not resell able by SUP due to customers own actions in dealing with the product

    Core Returns

    Core Return Instructions: STOP! Please read to avoid costly delays!

    • Step 1:  Verify the core will be received back within 30 days. (See Deadline)
    • Step 2: Fill out the Return Form.
    • Step 3: Wait for return instructions. SUP will email a return number (RMA) and a return shipping address. Many cores will be sent directly back to the manufacturer, so please read the instructions.
    • Step 4: Package the core. Good packaging prevents costly damage and/or the core being refused by the shipping carrier. It may be possible to reuse the box your original product came in. If not, use a box strong enough to support the product. Seal the product in a plastic bag to prevent leaks. Cushion the product with packing material and securely seal the package with tape.
    • Step 5: Attach the shipping label you have purchased (see return shipping policy) and write the return number (RMA) large and clear on the outside of the box.
    • Step 6: Ship the core.

    Core Return Policy *** Important Please Read ***

    Deadline: Core returns will only be accepted within 30 days of receiving the original product. After 30 days core credit refunds will be at the discretion of SUP.

    Refund Policy: Returns made between 0-30 days are eligible for credit back to the original payment method used for the purchase. Credit may be full, partial, or denied based on the acceptance policy below. Please allow up to 4 weeks after the core is received for inspection and refund if accepted.

    Return Shipping Policy: Core return shipping is the responsibility of the customer. SUP recommends using a carrier that provides package tracking and insurance. You will not be reimbursed for shipping costs incurred in shipping the core. SUP is not responsible for cores received damaged, freight penalties, and/or lost shipments.

    Acceptance Policy:

     

    • No leaking fluids, all fluids must be drained, and the core must be sealed in a plastic bag. 
    • The core returned must be a like-for-like make, model, type, and part number.
    • Cores will not be accepted from a salvage or junkyard.
    • Cores must not be disassembled or have missing and/or damaged major components. 
    • Cores must be in rebuildable condition.

    Core refund acceptance is at the discretion of SUP and the manufacturer/remanufacture or the original product. Failure to follow the above policy may result in partial credit and/or no credit being issued. If you would like a core returned that has been denied acceptance, you may request that within 30 days and pay for return shipping. Cores that have not been accepted and are unclaimed by the customer after 30 day will be destroyed and disposed of.

    Updated 08/22/2024

    Related Products

    Example product title
    From $439.00
    From $439.00
    Example product title
    From $439.00
    From $439.00
    Example product title
    From $439.00
    From $439.00
    Example product title
    From $439.00
    From $439.00
    Example product title
    From $439.00
    From $439.00
    Example product title
    From $439.00
    From $439.00

    Recently Viewed Products