AIR LIFT 88350 LOADLIFTER 5000 ULTIMATE HELPER SPRING KIT

Fitment: 2020-2022 FORD F-350 4WD (DRW)

SKU: AIR88350
$490.02
$490.02
Please hurry! Only 0 left in stock
Subtotal: $490.02
10 customers are viewing this product
AIR LIFT 88350 LOADLIFTER 5000 ULTIMATE HELPER SPRING KIT

AIR LIFT 88350 LOADLIFTER 5000 ULTIMATE HELPER SPRING KIT

$490.02

AIR LIFT 88350 LOADLIFTER 5000 ULTIMATE HELPER SPRING KIT

$490.02
The Air Lift 88350 LoadLifter 5000 Ultimate Helper Spring Kit is an excellent way to get a comfortable ride when hauling in your 2020-2022 Ford F-350 4WD (DRW). This adjustable air spring set will allow you to fine-tune the air pressure to the weight you are hauling for enhanced ride comfort. With the ability to level up to a 5,000-pound capacity, this air spring kit will give your vehicle a comfortable and secure ride whether empty or loaded.  

This Air Lift 88350 LoadLifter 5000 Ultimate Helper Spring Kit works with your factory suspension to give your truck more load support for a more stable ride. These air springs keep the weight evenly distributed to all four tires to minimize trailer sway, bottoming out, and to reduce porpoising/lurching. This also improves headlight aim on the road ahead and promotes even tire wear on all four corners. 

The Air Lift 88350 LoadLifter 5000 Ultimate Helper Spring Kit features air springs with a built-in urethane foam jounce bumper. This bumper allows you to run 0 air pressure and works as a backup when hauling heavy loads or if the air spring gets punctured. Built out of 2-Ply Fabric like a tire for maximum strength, these air springs are independently adjustable from left to right for uneven loads. Upper and lower roll plates are included to protect the springs from sharp edges and increase load capacity by 10%. With fully illustrated instructions, no-drill installation and a limited lifetime warranty, this air spring kit offers straightforward mounting and peace of mind.   

FEATURES:
  • Improved Braking
  • No-Drill Installation
  • Better Headlight Aim
  • More Even Tire Wear
  • Built-In Internal Jounce Bumper
  • Air Adjustable From 5 To 100 PSI 
  • Up To 5,000lbs Of Leveling Capacity 
  • Quick Connect Easy-To-Use Air Fittings
  • Reduces Swaying, Porpoising & Bottoming Out
  • Includes Roll Plates To Protect The Air Springs 
  • Built Like A Tire & Reinforced w/ 2-Ply Fabric For Maximum Strength 
  • Limited Lifetime Warranty 
Application Notes: 
Fits Dual Rear Models Only
Does not fit Tremor or Commercial Chassis model.
Will not fit with factory optional air equipped vehicles.

Product Returns

Product Return Policy

  • Returns must be packaged securely in an outer carton
  • Do not write on the product packaging itself. Write only on the outer shipping carton.
  • Packages received without a Return Authorization Number written clearly on the outer carton will be refused.
  • Returnable items must be received by SUP within 30 days of the product being received by you the customer. (determined by tracking number)
  • Returned product must be in new, re-saleable condition, with all original boxes, packaging, parts, cables, manuals, etc.
  • Upon receipt, all returns will be inspected, and, at our discretion, credit may be refused or a restocking fee of 5%-10% may be assessed.
  • Original shipping cost and shipping protection charges are non-refundable.
  • Customer is responsible for shipping costs incurred to return products.
  • Products can only be returned for a refund, store credit, or an exchange for the same item. Product cannot be exchanged for a different part number.

Some Circumstances in which credit will not be issued but not limited to:

  • Product has been installed and/or used
  • Product has been damaged from an attempt to be installed and/or used
  • Product is shipped back without original box, manual and/or parts
  • Seal on electrical parts is broken
  • Product serial number does not match that of which was original shipped to buyer
  • Product is deemed not resell able by SUP due to customers own actions in dealing with the product

Core Returns

Core Return Instructions: STOP! Please read to avoid costly delays!

  • Step 1:  Verify the core will be received back within 30 days. (See Deadline)
  • Step 2: Fill out the Return Form.
  • Step 3: Wait for return instructions. SUP will email a return number (RMA) and a return shipping address. Many cores will be sent directly back to the manufacturer, so please read the instructions.
  • Step 4: Package the core. Good packaging prevents costly damage and/or the core being refused by the shipping carrier. It may be possible to reuse the box your original product came in. If not, use a box strong enough to support the product. Seal the product in a plastic bag to prevent leaks. Cushion the product with packing material and securely seal the package with tape.
  • Step 5: Attach the shipping label you have purchased (see return shipping policy) and write the return number (RMA) large and clear on the outside of the box.
  • Step 6: Ship the core.

Core Return Policy *** Important Please Read ***

Deadline: Core returns will only be accepted within 30 days of receiving the original product. After 30 days core credit refunds will be at the discretion of SUP.

Refund Policy: Returns made between 0-30 days are eligible for credit back to the original payment method used for the purchase. Credit may be full, partial, or denied based on the acceptance policy below. Please allow up to 4 weeks after the core is received for inspection and refund if accepted.

Return Shipping Policy: Core return shipping is the responsibility of the customer. SUP recommends using a carrier that provides package tracking and insurance. You will not be reimbursed for shipping costs incurred in shipping the core. SUP is not responsible for cores received damaged, freight penalties, and/or lost shipments.

Acceptance Policy:

 

  • No leaking fluids, all fluids must be drained, and the core must be sealed in a plastic bag. 
  • The core returned must be a like-for-like make, model, type, and part number.
  • Cores will not be accepted from a salvage or junkyard.
  • Cores must not be disassembled or have missing and/or damaged major components. 
  • Cores must be in rebuildable condition.

Core refund acceptance is at the discretion of SUP and the manufacturer/remanufacture or the original product. Failure to follow the above policy may result in partial credit and/or no credit being issued. If you would like a core returned that has been denied acceptance, you may request that within 30 days and pay for return shipping. Cores that have not been accepted and are unclaimed by the customer after 30 day will be destroyed and disposed of.

Updated 08/22/2024

Related Products

Recently Viewed Products