3/8 Inch Street Performance Pushrods 94-03 Ford 7.3L Powerstroke XD321 XDP

3/8 Inch Street Performance Pushrods 94-03 Ford 7.3L Powerstroke XD321 XDP

Fitment: 1994-2003 Ford 7.3L Powerstroke

SKU: XD321
$269.95
$269.95
Please hurry! Only 0 left in stock
Subtotal: $269.95
10 customers are viewing this product
3/8 Inch Street Performance Pushrods 94-03 Ford 7.3L Powerstroke XD321 XDP

3/8 Inch Street Performance Pushrods 94-03 Ford 7.3L Powerstroke XD321 XDP

$269.95
3/8 Inch Street Performance Pushrods 94-03 Ford 7.3L Powerstroke XD321 XDP

3/8 Inch Street Performance Pushrods 94-03 Ford 7.3L Powerstroke XD321 XDP

$269.95
Description

Eliminate the weak link in the valvetrain of your 1994-2003 Ford 7.3L Powerstroke with the XDP Pushrods 3/8 inch Street Performance XD321. The factory pushrods in your 7.3L are almost 10.25 inch long and cannot stand up to the stress of a modified engine. Increased valve spring pressures, cylinder pressures, and increased engine RPM can quickly max out the capabilities of your stock pushrods causing flex that leads to valvetrain damage and power loss.

This flex is not visible to the naked eye and while your factory pushrods won't show signs of failure, it does not mean that you should not replace them for a stronger component.

The XD321 Pushrods are manufactured in the USA to XDP's stringent standards. Expertly handcrafted with only the highest quality materials, the 3/8 inch Street Performance Pushrods are made from a seamless 4130/4135 chromoly tubing that is cold drawn over a mandrel for increased rigidity and flex reduction.

The tips are manufactured from a core hardened and triple tempered 86L20 bar stock for maximum impact and wear resistance. This combination of manufacturing processes and materials results in a stronger pushrod giving you a quality component that helps to maximize valvetrain performance. Sold as a set.
Features:

  • Supports 750HP+
  • 170,000 PSI Tensile Strength
  • 4130/4135 Chromoly Construction
  • 3/8 inch x .095 inch, 10.240 inch Overall Length
  • Made in the USA!

Installation Note:
These Pushrods are a direct replacement for the factory pushrods in your engine.
Please consult the factory service manual for removal, installation and valve adjustment instructions. This information can also be found in the Haynes Manuals below.
Warranty Info:
Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit.

Return Policy

Product Returns

Product Return Policy

  • Returns must be packaged securely in an outer carton
  • Do not write on the product packaging itself. Write only on the outer shipping carton.
  • Packages received without a Return Authorization Number written clearly on the outer carton will be refused.
  • Returnable items must be received by SUP within 30 days of the product being received by you the customer. (determined by tracking number)
  • Returned product must be in new, re-saleable condition, with all original boxes, packaging, parts, cables, manuals, etc.
  • Upon receipt, all returns will be inspected, and, at our discretion, credit may be refused or a restocking fee of 5%-10% may be assessed.
  • Original shipping cost and shipping protection charges are non-refundable.
  • Customer is responsible for shipping costs incurred to return products.
  • Products can only be returned for a refund, store credit, or an exchange for the same item. Product cannot be exchanged for a different part number.

Some Circumstances in which credit will not be issued but not limited to:

  • Product has been installed and/or used
  • Product has been damaged from an attempt to be installed and/or used
  • Product is shipped back without original box, manual and/or parts
  • Seal on electrical parts is broken
  • Product serial number does not match that of which was original shipped to buyer
  • Product is deemed not resell able by SUP due to customers own actions in dealing with the product

Core Returns

Core Return Instructions: STOP! Please read to avoid costly delays!

  • Step 1:  Verify the core will be received back within 30 days. (See Deadline)
  • Step 2: Fill out the Return Form.
  • Step 3: Wait for return instructions. SUP will email a return number (RMA) and a return shipping address. Many cores will be sent directly back to the manufacturer, so please read the instructions.
  • Step 4: Package the core. Good packaging prevents costly damage and/or the core being refused by the shipping carrier. It may be possible to reuse the box your original product came in. If not, use a box strong enough to support the product. Seal the product in a plastic bag to prevent leaks. Cushion the product with packing material and securely seal the package with tape.
  • Step 5: Attach the shipping label you have purchased (see return shipping policy) and write the return number (RMA) large and clear on the outside of the box.
  • Step 6: Ship the core.

Core Return Policy *** Important Please Read ***

Deadline: Core returns will only be accepted within 30 days of receiving the original product. After 30 days core credit refunds will be at the discretion of SUP.

Refund Policy: Returns made between 0-30 days are eligible for credit back to the original payment method used for the purchase. Credit may be full, partial, or denied based on the acceptance policy below. Please allow up to 4 weeks after the core is received for inspection and refund if accepted.

Return Shipping Policy: Core return shipping is the responsibility of the customer. SUP recommends using a carrier that provides package tracking and insurance. You will not be reimbursed for shipping costs incurred in shipping the core. SUP is not responsible for cores received damaged, freight penalties, and/or lost shipments.

Acceptance Policy:

 

  • No leaking fluids, all fluids must be drained, and the core must be sealed in a plastic bag. 
  • The core returned must be a like-for-like make, model, type, and part number.
  • Cores will not be accepted from a salvage or junkyard.
  • Cores must not be disassembled or have missing and/or damaged major components. 
  • Cores must be in rebuildable condition.

Core refund acceptance is at the discretion of SUP and the manufacturer/remanufacture or the original product. Failure to follow the above policy may result in partial credit and/or no credit being issued. If you would like a core returned that has been denied acceptance, you may request that within 30 days and pay for return shipping. Cores that have not been accepted and are unclaimed by the customer after 30 day will be destroyed and disposed of.

Updated 08/22/2024

Related Products

Example product title
$269.95
$269.95
Example product title
$269.95
$269.95
Example product title
$269.95
$269.95
Example product title
$269.95
$269.95
Example product title
$269.95
$269.95
Example product title
$269.95
$269.95

Recently Viewed Products